LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1990 >> Integra LS, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Resistance (Integra)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Resistance (Integra)

  1. Remove distributor cap. Remove 2 Phillips screws retaining primary ignition leads. Remove primary leads from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" on ignition coil. See Figure . Resistance should be .6-.8 ohms at 70°F (20°C).
  2. Check secondary resistance between terminal "A" and secondary terminal (coil tower). Resistance should be 9760-14,640 ohms at 70°F (20°C). Replace coil if readings are not within specifications.
scientia non olet · About LEMON Manuals