LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1991 >> Legend Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Electronic Ignition System Checks >> Ignition Coil Resistance (INTEGRA)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Resistance (INTEGRA)

  1. Remove distributor cap. Remove screws retaining primary ignition leads. Remove primary leads from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" on ignition coil. See Figure. Resistance should be .6-.8 ohm at 70°F (20°C).
  2. Check secondary resistance between terminal "A" and secondary terminal (coil tower). Resistance should be 9760-14,640 ohms at 70°F (20°C). Replace coil if readings are not within specifications.
scientia non olet · About LEMON Manuals