Fuel Pressure Regulator

See FUEL SYSTEM in BASIC TESTING article in the ENGINE PERFORMANCE Section.

NOTE: The following tests can only be performed with PGM-FI Test Harness (07LAJ-PT3010A ). Terminals on PGM-FI test harness connectors match terminals on ECU and ECU connectors. This allows the technician to test continuity of specified wires and resistance of devices when the ECU is disconnected. When ECU is connected to PGM-FI test harness, sensor input values can be monitored (at the test connector terminals) while engine is in operation. To identify ECU terminals, See Figure . Vacuum hose identification numbers are imprinted on each hose, connection and source.