Control Unit Input Test No. 10
NOTE:
With ignition switch ON, connect the 7-P and 22-P connectors to the control unit and perform test.
CONTROL UNIT INPUT TEST NO. 10
| Wire | Test Condition | Test: Desired Result | Possible Cause,If Result is not Obtained | ||
|---|---|---|---|---|---|
| GREEN/ BLUE or (GREEN/ RED) | Driver or passenger door closed | Check for voltage to Ground should be less than 1V. (1) | Short to ground, Faulty door latch sw. or faulty ctrl unit. | ||
| GREEN/ BLUE or (GREEN/ RED) | Driver or passenger door open | Check for voltage to Ground should be approx. 5V or more. (1) | An open in wire orFaulty door latch switch. | ||
|
|||||