Control Unit Input Test No. 13
NOTE:
With ignition switch ON, connect the 7-P and 22-P connectors to the control unit and perform test.
CONTROL UNIT INPUT TEST NO. 13
| Wire | Test Condition | Test: Desired Result | Possible Cause,If Result is not Obtained |
|---|---|---|---|
| WHITE/ BLUE or (RED/ BLUE(2) | Driver or passenger door opened | Check for voltage to Ground should be less than 1V when the shoulder buckle is not in the rear lock position. | Short to ground, Faulty rear lock position (seat belt) switch or Faulty Control Unit |
| WHITE/ BLUE or (RED/ BLUE(2) | Driver or passenger door closed | Check for voltage to Ground should be approx. 5V or more. when the shoulder buckle is in the rear lock position, and the shoulder seat belt is buckled. | An open in wire or Faulty rear lock position (seat belt)switch. |