Control Unit Input Test No. 15
NOTE:
With ignition switch ON, connect the 7-P and 22-P connectors to the control unit and perform test.
CONTROL UNIT INPUT TEST NO. 15\
| Wire | Test Condition | Test: Desired Result | Possible Cause,If Result is not Obtained |
|---|---|---|---|
| BLUE/ YELLOW or (RED/ GREEN) | Driver or passenger door opened | Check voltage to ground: Should be battery voltage | Short to ground, Faulty shoulder seatbelt retractor (solenoid) |
| BLUE/ YELLOW or (RED/ GREEN) | Driver or passenger door closed | Check voltage to ground: Should be less than 1V | Faulty Control Unit |
| BLUE/ RED or (RED) | Driver or passenger door opened | Check voltage to ground:Should be approx. 5V or more | Short to ground, Faulty shoulder seatbelt retractor (sensor switch) Faulty CTRL UNIT |
| BLUE/ RED or (RED) | Driver or passenger door closed | Check voltage to ground: Should be less than 1V | An open in the wire or Faulty Control Unit |