Control Unit Input Test No. 16
NOTE:
With ignition switch ON, connect the 7-P and 22-P connectors to the control unit and perform test.
CONTROL UNIT INPUT TEST NO. 16
| Wire | Test Condition | Test: Desired Result | Possible Cause,If Result is not Obtained |
|---|---|---|---|
| WHITE/ GREEN (3) | Driver lap seat belt buckled | Check voltage to ground: Should be battery voltage | Short to ground, Faulty driver shoulder seat belt retractor (lap seat belt switch) or Faulty Control Unit |
| WHITE/ GREEN (3) | Driver lap seat belt unbuckled | Check voltage to ground:Should be less than 1V. | An open wire or Faulty driver shoulder seat belt retractor (lap seat belt switch) |