Legend & Vigor
- Disconnect 4-pin connector from brakelight switch. Using a DVOM, check for continuity between brakelight switch terminals "A" and "D". See Fig 1
. Continuity should be present. Check for continuity between brakelight switch terminals "B" and "C". Continuity should not be present.
- Depress brake pedal and hold. Check for continuity between brakelight switch terminals "A" and "D". Continuity should not be present. Check for continuity between brakelight switch terminals "B" and "C". Continuity should be present. If continuity readings are not as specified, check brake pedal height. See BRAKE PEDAL HEIGHT
under ADJUSTMENTS
. If brake pedal height is okay, replace brakelight switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.