Relieving Accumulator/Line Pressure

Drain brake fluid from master cylinder and modulator reservoir. Remove red cap from maintenance bleeder screw. See Fig 1 or Fig 2 . Using ABS "T" Wrench (07HAA-SG00100), loosen maintenance bleeder screw. Turn "T" wrench one complete turn to relieve accumulator line pressure. Tighten bleeder screw.

Fig 1: Locating Maintenance Bleeder Screw (Integra)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Locating Maintenance Bleeder Screw (Legend & Vigor)

Courtesy of AMERICAN HONDA MOTOR CO., INC.