Warning Light Stays On

If warning light stays on after 3 seconds, ensure LED on control unit is blinking. If LED is not blinking, see ANTI-LOCK WARNING LIGHT STAYS ON under ANTI-LOCK WARNING LIGHT under TROUBLE SHOOTING. If warning light is still on after going through checks in ANTI-LOCK WARNING LIGHT STAYS ON, check control unit connector.
If connector is okay, check ABS fuse No. 2. Check for open in White wire between ABS fuse No. 2 and control unit.
On Integra, check Black/Yellow wire between fuse No. 17 and fail-safe relays. Check Green wire between fail safe relays.
On Legend, check Yellow/Black wire between ABS fuse No. 3 and fail-safe relays. Check Yellow/Green wire between fail-safe relays.
On Vigor, check Black/Yellow wire between ABS fuse No. 7 and fail-safe relays. Check Yellow/Green wire between fail-safe relays.
On all models, check for short in Blue/Red wire between instrument panel and control unit. Check for open in White/Blue wire between alternator and control unit. If problem cannot be found, install a known good control unit and retest.