Charge Warning Light
- Turn ignition on. Charge warning light should come on. If light comes on, go to ALTERNATOR OUTPUT TEST . If light does not come on, disconnect alternator connector and short harness connector terminal "L" (White/Blue wire) to ground. See Figure, Figure or Figure
.
- If light now comes on, go to ALTERNATOR OUTPUT TEST . If light does not come on, check for following conditions:
- Blown fuse No. 24 (Integra), No. 22 (Legend) or No. 2 (Vigor).
- Open in White/Blue wire between warning light and voltage regulator.
- Open in Black/Yellow wire between warning light and dash fuse block or between dash fuse box and ignition switch.