Temperature Gauge
- Check for blown fuse No. 23 (Integra) or No. 13 (Legend) in dash fuse block. Turn ignition off. Disconnect Yellow/Green wire from sending unit. Sending unit is threaded into cylinder head. Using a jumper wire, ground sending unit wire.
- Turn ignition on. Gauge needle should start moving toward "H" mark on gauge. Turn ignition off within 2 seconds or before gauge needle reaches "H" mark. Failure to turn ignition off before needle reaches "H" mark may result in damage to temperature gauge.
- If temperature gauge needle does not move, check for open circuit in Yellow and Yellow/Green wires. Replace temperature gauge if fuse and wiring are okay. If gauge is okay, check temperature sending unit.