LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis >> Engine Mechanical >> Starter >> On-Vehicle Testing >> Starter Function Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Function Test

  1. Disconnect wiring harness connector from ignition coil. On M/T models, depress clutch pedal to floor. On all models, turn ignition switch to START position. Starter should crank.
    NOTE: On M/T models, starter will not crank unless clutch pedal is fully depressed.
  2. If starter does not crank, check battery condition. Check for loose or corroded battery cables and starter wires. Repair or replace as necessary. If starter still does not crank, unplug terminal "S" connector (Black/White wire) from starter solenoid.
  3. Connect jumper wire between positive battery terminal and solenoid terminal "S". Starter should crank. If starter does not crank, remove starter and check for internal problems. If starter cranks, check Black/White wire, fuse, starter relay, ignition switch, clutch interlock switch (M/T) or neutral safety switch (A/T). Repair or replace as necessary.
scientia non olet · About LEMON Manuals