Idle Speed: Integra
- Start engine and operate until cooling fan comes on. Connect tachometer. Disconnect 2-wire connector from Electronic Air Control Valve (EACV). See Fig 1
.
- Check base idle speed with gear in Neutral (A/T in "N" or "P") and all accessories off, including cooling fan. Turn screw to adjust base idle speed to 550-650 RPM. See Fig 2
.
- Turn ignition off. Reconnect 2-wire EACV connector. Remove hazard fuse at battery positive terminal for 10 seconds to reset ECU. Start engine and allow to idle for one minute.
- Check idle speed with engine under load (A/C on) and under no load (A/C off). Idle speed should be 700-800 RPM. See IDLE SPEED SPECIFICATIONS
table.
Courtesy of AMERICAN HONDA CO., INC.
Courtesy of AMERICAN HONDA MOTOR CO., INC.