LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Test (Integra)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Test (Integra)

  1. Turn ignition off. Remove distributor cap. Remove screws retaining primary ignition leads. Remove primary leads from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" on ignition coil. See Fig 1 . Resistance should be .6-.8 ohm at 68°F (20°C).
  2. Check secondary resistance between terminal "A" and secondary terminal (coil tower). Resistance should be 9760-14,640 ohms at 68°F (20°C). Replace coil if readings are not within specifications.
    IGNITION COIL RESISTANCE (INTEGRA)

    Application Ohms @ 68°F (20°C)
    Primary .6-.8
    Secondary 9760-14,640
    Fig 1: Testing Ignition Coil (Integra)
    G92J26194Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals