LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Engine Sensors & Switches >> EGR Valve Lift Sensor >> Automatic Transmission
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Transmission

  1. EGR lift sensor is part of EGR valve, located on top of engine. Turn ignition on. Measure voltage between terminals of Yellow/White wire (positive) and Green/White wire (negative) by backprobing EGR valve lift sensor connector. If voltage is not about 5 volts, repair open in Yellow/White or Green/White wire between ECU and EGR valve.
  2. Measure voltage between Yellow wire (positive) and Green/White wire (negative) by backprobing EGR valve lift sensor 4-wire connector. If voltage is about 1.2 volts, slowly apply 8 in. Hg vacuum to EGR valve. Completely release and reapply vacuum several times. Voltmeter should indicate about 4 volts with vacuum applied. If voltage is not as specified, replace EGR valve.
scientia non olet · About LEMON Manuals