Fuel Gauge Sending Unit Test: Integra
WARNING: This page is about a different car, the 1991 Acura Legend and 1991 Acura Integra. However, it is still accessible from the selected car via links, so may be relevant.
Remove rear seat. Remove fuel pump access cover. Ensure ignition is off. Disconnect 3-pin connector from fuel gauge sending unit. Using fuel Sender Wrench (07920-SB20000), remove sending unit. Measure resistance between sending unit terminals "A" and "B" while moving the float. See Figure . Ensure resistance values are within specifications. See FUEL GAUGE SENDING UNIT RESISTANCE table.