Code 1 Or 2: O2 Sensor
- Turn ignition off. Remove fuse No. 15 (ACG) in underdash fuse box for 10 seconds to reset ECU. Start and warm engine until cooling fan comes on.
- Road test vehicle. Place manual transmission in fourth gear (A/T in 2nd). With engine speed at 1200 RPM, accelerate at wide open throttle for at least 5 seconds, and then decelerate with throttle fully closed for at least 5 seconds.
- Check ECU for fault codes. See RETRIEVING CODES . If no codes are present, problem is intermittent. Check for poor connections at O2 sensor and ECU connector. If Code 1 and/or 2 are present, go to CODE 43 OR 44: FUEL SUPPLY SYSTEM .