Code 1: O2 Sensor
- Turn ignition off. Remove BACK UP fuse at battery positive terminal for 10 seconds to reset ECU. Start and warm engine to normal operating temperature.
- Road test vehicle. With transmission in second gear, accelerate at wide open throttle for at least 5 seconds, and then decelerate with throttle fully closed for at least 5 seconds.
- Check ECU for fault codes. See RETRIEVING CODES . If Code 1 is not present, problem is intermittent. Check for poor connections at ECU connector and O2 sensor. If Code 1 is present, go to CODE 43: FUEL SUPPLY SYSTEM .