LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1994 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Trouble Codes >> Code 13: Barometric (BARO) Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code 13: Barometric (BARO) Sensor

NOTE: Barometric sensor is built into ECM. Circuit testing is not required.
  1. Turn ignition off. Remove BACK-UP fuse (7.5-amp) from underhood fuse/relay box for 10 seconds to reset ECM.
  2. Check ECM for fault codes. If Code 13 is not present, problem is intermittent. Check for poor connections at ECM connector and Transmission Control Module (TCM) connector (if equipped). Test drive vehicle and check again. If Code 13 is present, replace ECM and retest.