LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1995 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Power Source
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Power Source

  1. Remove distributor cap. Disconnect ignition coil primary leads. Turn ignition on. Measure voltage between ground and Black/Yellow wire of ignition coil wiring harness. See Figure, 7, or 8.
  2. Battery voltage should exist. If battery voltage does not exist, inspect for open in Black/Yellow wire between ignition coil and ignition switch. If wire is okay, go to IGNITOR INPUT TEST  procedure.
scientia non olet · About LEMON Manuals