LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1995 >> Legend SE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Timing Control System >> Ignition Timing Adjuster
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Timing Adjuster

  1. Unplug ignition timing adjuster 3-pin connector. Ignition timing adjuster is located next to control box on firewall. See Figure . Measure resistance between "A" and "C" terminals of ignition timing adjuster.
  2. Resistance should be 3500-6500 ohms. If resistance is as specified, go to step 3). If resistance is not as specified, replace ignition timing adjuster.
  3. Measure and record resistance between "A" and "B" terminals on timing adjuster side of harness. Measure and record resistance between "B" and "C" terminals on same side of connector. Add resistance values together. If total of resistance values is not 3500-6500 ohms, replace ignition timing adjuster.
scientia non olet · About LEMON Manuals