LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1996 >> 2.5TL >> Repair and Diagnosis >> Engine Performance >> Engine Controls - Adjustments >> Adjustment >> Ignition Timing >> Checking Ignition Timing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking Ignition Timing

  1. Operate engine until cooling fan comes on. Locate 2-pin service check connector (under glove box). Plug Service Check Connector Tool (07PAZ-0010100 ), into service check connector. Refer to Fig 1.
  2. Connect inductive timing light to No. 1 spark plug wire.
  3. Ensure idle speed is within specification. See IDLE SPEED  under IDLE SPEED & MIXTURE. Red (15° BTDC) mark on crankshaft pulley should align with pointer on front of engine. See Fig 2. If Red mark and pointer are not aligned, replace ECM/PCM. Timing g is not adjustable.
    Fig 1: Installing Service Check Connector Tool
    G96C01345Courtesy of AMERICAN HONDA MOTOR CO., INC.
    Fig 2: Identifying Ignition Timing Marks
    G93A78063Courtesy of AMERICAN HONDA MOTOR CO., INC.
    IGNITION TIMING (1) (Degrees BTDC RPM)

    Application (2) Man. Trans. (3) Auto. Trans.
    2.5TL - 13-17 650-750
    (1) Service Check Connector Tool (07PAZ-0010100 ) must be installed before checking timing.
    (2) Manual transmission in Neutral.
    (3) Automatic transmission in Neutral or Park.
scientia non olet · About LEMON Manuals