LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1996 >> 3.2TL >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Component Tests >> Motor Test >> Driver's Window Motor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver's Window Motor

  1. Remove driver's door panel. Disconnect door panel connectors. Disconnect window motor 4-pin connector. Using a fused jumper wire, connect battery voltage to window motor connector terminal No. 1 (Red/Blue wire). Using another jumper wire, ground terminal No. 2 (Red/Yellow wire). Window motor should run smoothly UP. When polarity is reversed, window motor should run smoothly DOWN. If window motor runs smoothly in both directions, go to next step. If window motor does not run smoothly in both directions, replace window motor.
  2. Connect test leads of analog ohmmeter to window motor 4-pin connector terminal No. 3 (Blue wire) and terminal No. 4 (Black wire). Using fused jumper wires, connect battery voltage to 4-pin connector terminal No. 1 (Red/Blue wire) and ground to terminal No. 2 (Red/Yellow wire). If ohmmeter needle does not swing back and forth while motor operates, replace motor.
scientia non olet · About LEMON Manuals