LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1996 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Diagnosis & Testing >> Abs Function Test >> Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs Function Test: Testing

  1. Turn ignition switch to OFF position. Connect ABS Tester (07HAJ-SG0010B) to 6-pin inspection connector (located under passenger seat). See Figure . Start engine, and release parking brake. Place mode selector in mode 1. Push START TEST button. TEST-IN-PROGRESS light should come on. DO NOT  turn mode selector switch while TEST-IN-PROGRESS light is on.
  2. Ensure all 4 monitor lights on ABS tester come on within 1-2 seconds. ABS warning light should not come on. If light is on, check system for codes. See RETRIEVING CODES  .
  3. Turn mode selector to mode 2. Depress brake pedal firmly, and push START TEST button. ABS warning light should not come on and kickback should be felt at brake pedal. If light comes on or kickback is not felt, see ABS WARNING LIGHT TROUBLE SHOOTING  .
  4. Repeat step 3) for remaining ABS tester modes (3, 4 and 5). Results should be as described in mode 2. If results differ, see ABS WARNING LIGHT TROUBLE SHOOTING  . Breakdown of modes is as follows:
scientia non olet · About LEMON Manuals