Passenger Window Switch Test
Disconnect connector from switch. See WINDOW SWITCH under REMOVAL & INSTALLATION. Check for continuity between specified switch terminals with switch in each position. If continuity is not as specified, replace switch. See Fig 1 . See PASSENGER POWER WINDOW SWITCH TEST table.
PASSENGER POWER WINDOW SWITCH TEST (1)
| Window Switch Position | Continuity Between Terminals | |||
|---|---|---|---|---|
| Front | ||||
| Off | "A" & "B"; "D" & "E" | |||
| Up | "B" & "C"; "D" & "E" | |||
| Down | "A" & "B"; "C" & "D" | |||
| Rear | ||||
| Off | "A" & "B"; "C" & "E" | |||
| Up | "A" & "B"; "D" & "E" | |||
| Down | "B" & "D"; "C" & "E" | |||
|
||||