LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1996 >> SLX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Self-Diagnostic System >> Retrieving Codes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Retrieving Codes

NOTE: Codes can be retrieved using a scan tester. Trouble codes are referred to as DTCs.
  1. Code retrieval starts with diagnostic circuit check. See ON-BOARD DIAGNOSTIC II (OBD-II) SYSTEM CHECK  . MIL will come on when ignition is on and engine is not running. When engine is started, MIL should go off. If light remains on while engine is running, a trouble code is present.
  2. If light does not come on with ignition on and engine off, inspect MIL circuit before continuing. If MIL fails to operate, see ON-BOARD DIAGNOSTIC II (OBD-II) SYSTEM CHECK  .
  3. To retrieve codes, install scan tool. Select MIL dash lamp control and command the MIL OFF. Ensure MIL light is off and attempt to start engine. If vehicle does not start, go to vehicle NO-START tests.
scientia non olet · About LEMON Manuals