Ignition Coil Test
WARNING: This page is about a different car, the 1996 Acura 2.5TL. However, it is still accessible from the selected car via links, so may be relevant.
Turn ignition off. Unplug ignition coil connector. Refer to Fig. Fig 1. Measure resistance between indicated terminals. See IGNITION COIL RESISTANCE . Replace coil if measurements are not within specification.
IGNITION COIL RESISTANCE
| Application | Ohms 68°F (20°C) |
|---|---|
| Terminals 2 & 3 (Primary) | 0.36-0.44 |
| Terminals 3 & 4 | 2000-2300 |
| Terminal 2 & Secondary Terminal | 10,800-16,200 |