Power Mirror Test
Remove door panel. See DOOR PANEL under REMOVAL & INSTALLATION. Disconnect power mirror 10-pin connector. See Fig 1. Connect battery power to power mirror as specified in POWER MIRROR TEST table. If power mirror fails to function as specified, replace faulty power mirror. See POWER MIRROR under REMOVAL & INSTALLATION.
POWER MIRROR TEST
| Mirror Position | Battery to Mirror Terminals (+) & (-) |
|---|---|
| Tilt Up | 10 & 9 |
| Tilt Down | 9 & 10 |
| Swing Left | 9 & 8 |
| Swing Right | 8 & 9 |