LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1999 >> 2.3CL Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Component Testing >> Key Interlock Solenoid >> Honda Accord
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Honda Accord

  1. Remove left side lower dash cover. Disconnect 7-pin harness connector from steering lock assembly, located on lower right of steering column.
  2. Connect a DVOM between ignition harness connector terminals No. 5 (White/Red wire) and No. 7 (White/Yellow wire). Turn ignition key to ACC position. Push in on ignition key. Continuity should exist. Release ignition key. Continuity should not exist. If continuity is as specified, go to next step. If continuity is not as specified, replace ignition/steering lock assembly.
  3. Apply battery voltage to ignition harness connector terminal No. 7 (White/Yellow wire) and ground to terminal No. 3 (Black wire). If ignition key can be removed, key interlock solenoid is okay. If ignition can be removed, replace steering lock assembly. Key interlock cannot be serviced separately.
scientia non olet · About LEMON Manuals