Starter Relay Test: 3.2TL

Locate and remove starter relay from vehicle. Starter relay is plugged into driver's underdash fuse/relay box. Connect power and ground to relay terminals No. 3 and 4. See Fig 1 . Ensure continuity exists between relay terminals No. 1 and 2. Disconnect power and ground from terminals No. 3 and 4. Continuity should no longer exist between terminals No. 1 and 2. Replace starter relay if it does not test as specified.

Fig 1: Testing Starter Relay (3.2TL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.