Passenger's Power Window Switch
Remove passenger's door panel. See DOOR PANEL under REMOVAL & INSTALLATION. Remove passenger's power window switch from door panel. Disconnect 6-pin harness connector from switch. Check for continuity between specified switch terminals with switch in each specified position. See Fig 1 . See PASSENGER'S POWER WINDOW SWITCH table. If continuity is not as specified, replace passenger's power window switch.
PASSENGER'S POWER WINDOW SWITCH
| Application & Window Switch Position | Continuity Between Terminals No. |
|---|---|
| UP | 1, 2, 4, 5 & 6 |
| OFF | 1, 2, 3, 4 & 6 |
| DOWN | 1, 3, 4, 5 & 6 |