MDX, 3.2CL & 3.2TL
- Ensure idle speed is within specification. See IDLE SPEED under IDLE SPEED & MIXTURE. Connect Honda PGM tester to Data Link Connector (DLC). Select SCS menu option and follow scan tool instructions.
- Start engine and run at 3000 RPM, with no loads and transmission in Park or Neutral, until radiator fan comes on. Allow engine to idle. Connect timing light to No. 1 ignition coil wire. Aim timing light toward pointer on timing belt cover. Red mark on crankshaft pulley should align with pointer on front of engine. See Figure . If timing is not as specified (Red mark and pointer are not aligned), replace ECM/PCM. Timing is not adjustable.