Left Mirror Inoperative
- Connect a fused jumper wire between power mirror switch connector terminal "I" (Black/Yellow wire) and terminal "G" (Yellow/Red wire). See Figure. Connect a second fused jumper wire between terminal "E" (Yellow/White wire) and ground. Turn ignition on. Left mirror should tilt down. If mirror does not tilt down, check for open in Yellow/White wire between power mirror switch and left power mirror. See WIRING DIAGRAMS . If wire is okay, go to next step.
- Move second fused jumper wire from terminal "E" (Yellow/White wire) to terminal "D" (Yellow/Black wire). Left mirror should swing left. If mirror does not swing left, check for open in Yellow/Black wire between power mirror switch and left power mirror. If wire is okay, check left mirror motor. See POWER MIRROR MOTOR under COMPONENT TESTS.
- If mirror does not tilt down and does not swing left, check for open in Yellow/Red wire between power mirror switch and left power mirror. If mirror operates properly, check power mirror switch. See POWER MIRROR SWITCH under COMPONENT TESTS.