Shift Lock Solenoid Replacement
- Remove the center console panel and center console (see CENTER CONSOLE REMOVAL/INSTALLATION ).
- Disconnect the shift lock solenoid connector (2P), and remove it from the shift lever bracket base.
- Push the lock tab (A), pry the shift lock solenoid (B) to clear the projected tips (C) with a screwdriver, and remove the shift lock solenoid.
- Install the shift lock solenoid plunger (D) and plunger spring (E) in the new shift lock solenoid.
- Install the shift lock solenoid by aligning the joint (F) of the shift lock solenoid plunger with the tip (G) of the shift lock stop.
- Connect the shift lock solenoid connector, and install it on the shift lever bracket base.
- Install the center console and console panel (see CENTER CONSOLE REMOVAL/INSTALLATION ).