LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2002 >> 3.2CL Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Driver's Position Memory System >> Component Tests >> Driver's Position Memory Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver's Position Memory Switch

Remove driver's door panel. See DOOR PANEL  under REMOVAL & INSTALLATION. Disconnect memory switch 10-pin connector. Using an ohmmeter, verify continuity is as specified in DRIVER'S POSITION MEMORY SWITCH CONTINUITY  table. See Fig 1 . If memory switch fails any test, replace faulty switch.

DRIVER'S POSITION MEMORY SWITCH CONTINUITY

Position Continuity Between Terminals No.
Memo Button
Off No Continuity
On 7 & 10
Position 1 Button
Off No Continuity
On 9 & 10
Position 2 Button
Off No Continuity
On 8 & 10
Indicator
1 (1) 2 & 4
2 (1) 2 & 3
Illumination (2) 5 & 6
(1) There is a diode in line between terminals. If continuity is not indicated, switch DVOM leads and recheck.
(2) If no continuity exists between terminals No. 6 and 7, ensure illumination bulb is not burned out.
Fig 1: Identifying Driving Position Memory Switch Terminals
G00032322Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals