Shift Lock Solenoid Replacement
- Remove the console panel. See Console Panel
.
- Disconnect the shift lock solenoid 2P connector.
- Pry the shift lock solenoid clamp (A) with a screwdriver, then remove the shift lock solenoid (B).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Install the shift lock solenoid plunger (C) and plunger spring (D) in the new shift lock solenoid.
- Install the shift lock solenoid by aligning the joint of the shift lock solenoid with the tip of the shift lock stop (E).
- Secure the shift lock solenoid with the clamp, then connect the shift lock solenoid connector.