Power Mirror Motor
Remove appropriate door panel and disconnect power mirror motor 6-pin connector. See DOOR PANEL under REMOVAL & INSTALLATION. See Fig 1 . Using fused jumper wires, check motor operation by applying power and ground as specified. See POWER MIRROR MOTOR TEST . If motor does not function as specified, replace appropriate motor assembly.
POWER MIRROR MOTOR TEST
| Application & Mirror Movement | (1) Battery Connection (+) & (-) | |||
|---|---|---|---|---|
| Tilt | ||||
| Up | 4 & 5 | |||
| Down | 5 & 4 | |||
| Swing | ||||
| Left | 5 & 6 | |||
| Right | 6 & 5 | |||
|
||||