DTC P1607: Powertrain Control Module Internal Circuit Malfunction
- Perform PCM reset procedure. See PCM RESET PROCEDURE/CLEARING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. Turn ignition switch on. Wait 30 seconds. If DTC P1607 does not set, go to next step. If DTC P1607 sets, substitute known-good PCM, then recheck. If symptom or indication goes away, replace original PCM.
- Turn ignition switch off. Turn ignition switch back on. Wait 10 seconds. If DTC P1607 sets, substitute known-good PCM, then recheck. If symptom or indication goes away, replace original PCM. If DTC P1607 does not set, problem is intermittent. System is okay at this time.