DTC P2108: Throttle Actuator Control Module Problem
CAUTION:
When substituting or replacement of PCM is recommended, see PCM REMOVAL & REPLACEMENT
for important precautions.
- Turn ignition on. Using Honda PGM Tester or the HDS, do the DTC CLEAR in the CLEAR menu.
- Turn ignition off. Then turn ignition on. Check for Temporary DTCs or DTCs in the DTC menu. If DTC P2108 is set, substitute a known-good throttle body assembly and recheck. If problem is gone, replace original throttle body assembly. If DTC P2108 is not set, problem is intermittent. System is OK at this time. Check for poor connections or loose terminals at throttle actuator control module and PCM.