Toe-In Adjustment: Rear

Release parking brake. If parking brake is engaged, toe-in measurement may be incorrect. Check the toe-in. See WHEEL ALIGNMENT SPECIFICATIONS . If no adjustment is required, remove the alignment equipment. If adjustment is required, go to next step.
Hold adjusting bolt on lower control arm, and loosen lock nut. See Fig 1 . Turn adjusting bolt until toe-in is as specified. Install NEW lock nut, and tighten to specification. See TORQUE SPECIFICATIONS .

Fig 1: Adjusting Rear Toe-In (Typical)

Courtesy of AMERICAN HONDA MOTOR CO., INC.