LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2004 >> TL Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Driving Position Memory Systems (DPMS) >> DTC Troubleshooting >> DTC B1837: Power Seat Position Memory Recall Error
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B1837: Power Seat Position Memory Recall Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN system diagnosis test mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
  1. Clear the DTC with the HDS.
  2. Turn the ignition switch OFF, and then back ON (II).
  3. Operate the power seat with the power seat adjustment switch.
  4. Operate the power seat with the driving position memory switch.
  5. Check for DTCs with the HDS.

    Is DTC 1837 indicated? 

    1. YES  - Go to step  6.
    2. NO  - Intermittent failure, the system is OK at this time.
  6. Check for other DTCs.

    Is any other DTC indicated? 

    1. YES  - Go to the indicated DTCs troubleshooting.
    2. NO  - Go to step  7.
  7. Remove the driver's power seat (see FRONT SEAT REMOVAL/INSTALLATION ).
  8. Test the power seat motors (see DRIVER'S POWER SEAT MOTOR TEST ).

    Are the power seat motors OK? 

    1. YES  - Replace the power seat control unit.
    2. NO  - Replace the faulty power seat motor(s).
scientia non olet · About LEMON Manuals