Rod Bearing Selection: Notes

Each rod falls into one of four tolerance ranges (from 0 to 0.024 mm (0.0009 in.), in 0.006 mm (0.0002 in.) increments) depending on the size of its big end bore. It's then stamped with a number or bar (1, 2, 3, or 4/I, II, III, or IIII) indicating the range. You may find any combination of 1, 2, 3, or 4/I, II, III, or IIII in any engine. 

Normal Bore Size: 58.0 mm (2.28 in.) 

Inspect the connecting rod for cracks and heat damage.