Connecting Rod, Engine

Connecting Rod
Pin-to-rod clearance
Standard or New 0.005 - 0.014 mm (0.0002 - 0.0006 in.)
Service Limit 0.019 mm (0.0007 in.)
Small-end bore diameter 21.970 - 21.976 mm (0.8650 - 0.8652 in.)
Large-end bore diameter
Nominal 58.0 mm (2.28 in.)
End play installed on crankshaft
Standard or New 0.15 - 0.35 mm (0.006 - 0.014 in.)
Service Limit 0.45 mm (0.018 in.)

Connecting Rod Bolt Tightening torque: 20 Nm (2.0 kgf-cm, 14 ft. lbs.) +90 degrees