Intake Manifold

Intake Manifold





Install the intake manifold. Tighten the bolts and nuts sequentially in two or three steps. Always use a new intake manifold gasket.

Specified torque: 8 x 1.25 mm 22 Nm (2.2 kgf.m, 16 lbf ft)


Upper Cover





Install the upper cover. Tighten the bolts and nuts sequentially in two or three steps. Always use a new intake manifold gasket.

Specified torque: 6 x 1.0 mm 12 Nm (1.2 kgf.m, 8.7 lbf ft)