DTC P0125: Engine Coolant Temperature (ECT) Sensor 1 Malfunction/Slow: General Description

The powertrain control module (PCM) supplies voltage to the engine coolant temperature (ECT) signal circuit (about 5 V) through a pull-up resistor. As the engine coolant cools, ECT sensor 1 resistance increases, and the PCM detects a high signal voltage. As the engine coolant warms, ECT sensor 1 resistance decreases, and the PCM detects a low signal voltage.

If the ECT sensor 1 output voltage does not reach a specified temperature at which closed-loop control for stoichiometric air/fuel ratio starts within a set time, depending on the initial coolant temperature after starting the engine, the PCM detects a malfunction and a DTC is stored.