Rear Power Window Switch Test/Replacement

Remove the rear door panel (see REAR DOOR PANEL REMOVAL/INSTALLATION ), and disconnect the 14P connector from the rear power window switch.
Remove the power window switch panel (see REAR DOOR PANEL REMOVAL/INSTALLATION ).
Remove the three mounting screws and the rear power window switch (A).

Fig 1: Identifying Rear Power Window Switch And Mounting Screws
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Swap the rear power window switch with another known-good power window switch and test. If the original power window switch is faulty; replace it.
Install the switch in the reverse order of removal.
Reset the power window control unit (see RESETTING THE POWER WINDOW CONTROL UNIT ).