Without the HDS

NOTE:

To start the reset procedure, do the driver's power window master switch first (steps 1-8), then do the passenger's power window switch (steps 9-11) if equipped.
Do each bulleted item in step 4 within 5 seconds of each other.

Driver's Power Window

Turn the ignition switch ON (II).
Move the window all the way down by using the window DOWN switch.
Open the driver's door.
Do the following 3 times before going to step 5:
- Turn the ignition switch to LOCK (0).
- Push and hold the window DOWN switch.
- Turn the ignition switch ON (II).
- Release the window DOWN switch.
Confirm that AUTO UP no longer works. If AUTO UP still works, go back to step 1.
Move the window all the way down using the window DOWN switch.
Pull up and hold the window UP switch until the window is all the way up, then continue to hold the switch for 1 second.
Confirm that the power window control unit is reset by using the window AUTO UP and AUTO DOWN function.
If the window still does not work in AUTO, repeat the procedure several times, paying close attention to the 5 second time limit between steps. If it still does not work, go to B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).

Front Passenger's Power Window (if equipped)
Move the front passenger's window all the way down using the front passenger's power window DOWN switch.
Pull up and hold the front passenger's power window UP switch until the front passenger's power window is all the way up, then continue to hold the switch for 1 second.
Confirm that the power window control unit is reset by using the front passenger's power window AUTO UP and DOWN function.