DTC P0602: PCM Programming Error
NOTE:
- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see GENERAL TROUBLESHOOTING INFORMATION ).
- This DTC is indicated when a PCM update is not completed.
- Do not turn the ignition switch OFF while updating the PCM. If you turn the ignition switch OFF before completion, the PCM can be damaged.
- Do the PCM update procedure (see PCM UPDATE ).
- Check for Temporary DTCs or DTCs with the HDS.
Is DTC P0602 indicated?
YES - Replace the original PCM (see PCM REPLACEMENT ).
NO - Update is complete. If any other Temporary DTCs or DTCs are indicated, go to the indicated DTCs troubleshooting.