Throttle Actuator Control Module Replacement
- Remove the right kick panel (see step 3 under TRIM REMOVAL/INSTALLATION - DOOR AREAS ).
- Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
- Remove the HandsFreeLink control unit (see CONTROL UNIT INPUT TEST ) and the adaptive cruise control (ACC) unit and its bracket (if equipped) (see ADAPTIVE CRUISE CONTROL (ACC) UNIT REMOVAL/INSTALLATION ).
- Disconnect the throttle actuator control module 16P connector (A).
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Remove the nuts (B) and the throttle actuator control module (C).
- Install the parts in the reverse order of removal.